3 oldalas billenőplató

SCHWARZMÜLLER 2-Achs Segment Erdmulde TP22 NEU NOKIAN CT

NEW VEHICLE IN STOCK !!!
WhatsApp:

SCHWARZMÜLLER 2-AXLE CENTRAL AXLE HEAVY LOAD SEGMENT DUMP TRAILER - OFFROAD, type TP 22

Goods to be transported
Gravel, excavated earth etc. on construction sites
Tractor/trailer data:
Tractive power requirement min. 125KW/170 HP, tare weight min. 6.5t
Drawbar load min. 4 t
Trailer coupling K80 ball insert, bearing block with bottom hitch
Hydraulic supply for 2-tube tipping hydraulics and hydraulic supply with
At least 3 double-acting control units for drawbar, support leg, rear wall, etc.
(oil volume approx. 40 l required)
Weights
Total weight (permissible) 22 t
Total weight (technical) 28 t in off-road use with drawbar load 4 t
Dimensions
Interior length approx. 5,300 mm
Interior width approx. 2,330 mm
Interior load compartment height approx. 1,200 mm
Load volume approx. 13.5 m³
Overall width max. 2,550 mm
Unloaded loading height approx. 2,500 mm
Frame
Central-axle welded steel frame construction in weight-optimized design
Lightweight frame made of high-strength fine-grained steel, for wide tires Total width max. 2,550 mm
Towing device
Heavy-duty V-drawbar in welded framework construction
hydraulically height-adjustable approx. 500 mm and damped with heavy-duty ball head coupling K80
WITH TIRE PROTECTION !!!
Support device
1 steel drop support, height-adjustable, can be unhitched empty
Axles
BPW pendulum unit with drum brakes, S-cam brake 410/180 mm, load capacity 24 t, off-road version
Axle spacing 1,550 mm
1st and 2nd axle rigid
Wheels
4 tires 650/55 R 26.5, 169D, make NOKIAN CT
Load capacity 13.7 t / axle Maximum speed of 40 km/h
4 steel rims 20.00 x 26.5, offset 30 mm, silver
Brake system/suspension
Dual-circuit air brake system
Wabco brake system
Hydraulic ALB controller
Without ABS - for tractor operation up to 40 km/h
Spring-loaded parking brake on 2nd axle
Steel air reservoir 80 l
Brake/air connection lines with 2 individual yellow/red coupling heads
Hose lines routed via hose tower
Tipping skip
Steel body with reinforced Hardox floor plate (HB450) and reinforced upper belt
Floor thickness 6 mm = continuous floor plate, wall thickness 6 mm
Sloping front and rear walls,
Continuous steel protection plate (apron) on both sides in the wheel area on the outside
Increased excavator protection
Special steel rear wall for extra-high opening with recessed mounting,
Double-acting hydraulic cylinder with load holding valve, hydraulic actuation via towing vehicle
not suitable for forcible material compaction,
with additional joint, fixed locking hooks on the side
Hydraulic system
1-pipe system with hydraulic connection hose including SVK DN13 plug-in coupling
Incl. quick lowering for tipping hydraulics via 2-hose system
1 front tipper press reverse tipping, tipping angle approx. 55 °
Lighting/electrics
12/24 volt lighting system
2 full LED five-chamber tail lights "EcoLED II" with ballast
Fcboahh
on separate light carrier
2 LED clearance lights at the rear
LED side marker lights
2 LED license plate lights
Fixed connection cable 1 x 13-pin plug + 7-pin adapter
Paintwork
Steel granulate cleaning, multi-layer epoxy zinc phosphate primer and spray painting with
Spray painting with 2-component polyurethane top coat
Chassis = RAL 7021 black-grey
Body and rear wall painted = RAL 9005 deep black
Wheel hub

A hirdetés automatikusan került lefordításra, éppen ezért fordítási hibák előfordulhatnak.