Utcaseprő

Bucher - GMeiner - Giletta TGM 18250 Bucher

Operating hours: 3300, first registered: 23.06.2016, self-propelled_____Standard basic equipment: Fan unit - fan drive hydraulically via the transmission-independent auxiliary drive on the chassis (semi-hydrostatic drive)- Hydraulic fan drive - Hydraulic oil tank 50 l - Engine compartment made of noise-insulating material- Fan exhaust air duct upwards through the container front section- Hydraulic pump, single sweepings container- Sweepings container (with rear flap and sieve) and water tank made of 1.4003 chrome steel Engine compartment paneling normal steel- Sweepings container gross volume 6.5 m³- Sweepings container floor made of chrome-alloyed stainless steel, 1.4301- Sweepings container tilt angle approx. 55 degrees- Dirt chute made of chrome steel, 1.4003- Observation flap right and left- Dirty water drain 4", A-coupling - Air guide sieve, manually foldable- 2 rotating beacons at the rear of the KGB - Air shut-off on the suction hose, pneumatically operated - Multi-stage safety support, pneumatically operated - Marker lights on the rear of the container, side marker lights - Integrated water tank - Preparation for rear suction hose boom or mounted on the roof - Side marker lights Sweepings pickup - Sweepings pickup, wear-resistant coated - Rough pickup by tilting the suction mouth - Suction hose diameter 250 mm - Disc brush pushed - Hydraulically driven disc brush, steel - Disc brush, steel, diameter 500 mm pulled - Continuously variable speed control for disc brush - Two robust swiveling trailing wheels - Automatic lifting of the sweeping units when reversing - Work lights for sweeping unit Roller brush - Roller brush suspension, pulled - Brush length 1,300 mm, brush diameter 406 mm with plastic trim (depending on chassis) - Hydraulically driven roller brush - Throw limiting apron for Roller brush unit water system - Water tank volume approx. 1,554 l - Water tank made of chrome steel, 1.4003 with coating - Water level indicator in the driver's cab - Water filling device, Storz C (2"), right - Manual water filling device, right and left - Water pump, hydraulically driven - Automatic water stop when the sweeping units are raised - Spray water connection, 3/4", rear right - Water blow-out system - Electric water valves in the driver's cab - 2 nozzle strip low pressure front instrument panel and control panel - Bucher instrument panel, including 7" color display - Ergonomic control unit, mounted on the driver's door, equipped with the main functions - Display includes the following functions: water level indicator, operating hours and rear axle load - Warning and control lamps for rear axle load - Control and control unit for regulating the brush contact pressure (broom relief), stepless speed regulation of the disc brushes - Electric valves for water system, operated in the driver's cab. - Operation the dirt container functions using a cable remote control from the driver's cab, but also from outside. - Operation of the air guide sieve, operation at the rear right of the vehicle - Overload indicator for rear axle load, warning lamp in the display (option
Kdolhjfy Am Ujcdwwei

A hirdetés automatikusan került lefordításra, éppen ezért fordítási hibák előfordulhatnak.